Jet 52 | Bundle Box | Steerable | + Scorpion 5035 | Jet propulsion
€800.00*
% instead of €907.90* single purchase price (11.88% saved)
Content:
1 Set
Preorder, shippment time: 18 - 43 labor days**
Product number:
SW10382.2
Shipping weight/volume:
1.5 kg
Product information "Jet 52 | Bundle Box | Steerable | + Scorpion 5035 | Jet propulsion "
Jet drive for your model boat
This jet drive is the perfect companion for your model boat with a vertical stern (90°) and a length of at least 1.20 m or small watercraft tool of your choice.
The Jet 52 supplies extrem high maneuverability.
Bundle box for fast and easy assembly including:
- 1x Jet 52 - 1723-N
- 1x Reverse unit | 1723-R
- 1x Elastic coupling 8mm - 10 | 1721
- 1x Scorpion 5035 | 2136-W
- 1x Motor mount | 2136-M
The advantages of the Jet 52 at a glance:
- Nozzle, impeller, stator made of high-strength aluminum 7075
- All parts black anodized for extra protection against corrosion
- Flow optimized tunnel made of steel
- Vector control (horizontal | vertical)
- Triple bearing and shaft seal (Simmerring)
- Direct lubrication via grease nipple
- Salt water resistant
- Adjustable angle Left | right +/- 15° | Up | Down +/- 10°
That fits:
- Boats with a 90° stern and at least 1.20m in length
Good to know:
- The jet must be greased before usage
- For further questions please contat us
Jet 52
Length: |
220mm (8,66") |
|---|---|
| Height: | 80mm (3,15") |
| Width: | 82mm (3,23") |
| Weight: | 490g |
| Shaft: | 8mm (0,31") (Coupling 8- 0,31- " included) |
| Impeller: | 52mm | Aluminium 7075 (2,05") |
| Static thrust: | 120 - 240N (12-24,47Kg) |
| Rpm: | 23.500 - 26.500 |
| Min. required power: | 2,5 KW Current |
| Material: | Aluminium 7075 | Tunnel Carbon filament |
Scorpion 5035 Motor Diameter: |
61mm (2,4") |
|---|---|
| Stator Diameter: | 50mm (1,96") |
| Stator Length: | 35mm (1,37") |
| Magnet Poles: | 8 |
| Motor KV: | 760KV (rpm/V) |
| Max. current: | 7400W |
| Max. peak W: | 9600W |
| Max. V: | 40V |
| Max. current A: | 185A |
| Max. peak A: | 240A |
| Weight: | 729g |
| Diameter motor shaft: | 10mm (0,4") |
| Body length: | 75mm (2,91") |
| Motor Timing: | 5-7.5° |
| Attachment circle: | 40mm (1,26") (4xM4) |
| Max. Lipo: | 6 - 10 |
Download Anleitung
Jet 52 | Bundle Box | Steerable | + Scorpion 5035 | Jet propulsion
Product safety information Jet 52, motor mount, coupling:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Scorpion HK-5035-760KV | 7,4KW | water cooled | Outrunner
Product safety information:
Manufacturer:
Scorpion Power System Ltd.
16th Floor, Excelsior Industrial Building,
68-76 Sha Tsui Road, Tsuen Wan,
New Territories, Hong Kong
Email: support@spihk.com
Responsible person:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Jetsprint | Jetboat | 1110mm (43,7") | Several versions
Material :
C-AFK
Free recreation of Australian and New Zealand jet boats They drive there in artificially created slalom channels at very high speeds. Our Jetsprint can therefore be built with a jet drive true to the original. This gives you the opportunity to riot properly even when the water level is flat - exactly when other boats can no longer drive.
The Jetsprint has a very high maneuverability and an extremely high fun factor. The advantages at a glance High maneuverability for fast driving fun Suitable for any water and for beginners as well as professionals Suitable for our Jet 48 and Jet 52 Suitable for 40s - 50s electric motors and combustion engines with 22-32ccm Good to know The center of gravity for the structure is approx. 40% from the rear Manufactured using the "wet in wet" sandwich process (1 layer 100 GRP + 1 layer 160 C-AFK + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €360.00*
Jetsprint | Jetboat | 1110mm (43,7") | Several versions
Material :
CFK
Free recreation of Australian and New Zealand jet boats They drive there in artificially created slalom channels at very high speeds. Our Jetsprint can therefore be built with a jet drive true to the original. This gives you the opportunity to riot properly even when the water level is flat - exactly when other boats can no longer drive.
The Jetsprint has a very high maneuverability and an extremely high fun factor. The advantages at a glance High maneuverability for fast driving fun Suitable for any water and for beginners as well as professionals Suitable for our Jet 48 and Jet 52 Suitable for 40s - 50s electric motors and combustion engines with 22-32ccm Good to know The center of gravity for the structure is approx. 40% from the rear Manufactured using the "wet in wet" sandwich process (1 layer 100 GRP + 1 layer 160 CFK + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €360.00*
Jetsprint | Jetboat | 1110mm (43,7") | Several versions
Material :
GFK
Free recreation of Australian and New Zealand jet boats They drive there in artificially created slalom channels at very high speeds. Our Jetsprint can therefore be built with a jet drive true to the original. This gives you the opportunity to riot properly even when the water level is flat - exactly when other boats can no longer drive.
The Jetsprint has a very high maneuverability and an extremely high fun factor. The advantages at a glance High maneuverability for fast driving fun Suitable for any water and for beginners as well as professionals Suitable for our Jet 48 and Jet 52 Suitable for 40s - 50s electric motors and combustion engines with 22-32ccm Good to know The center of gravity for the structure is approx. 40% from the rear Manufactured using the "wet in wet" sandwich process (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €360.00*
River Race | Jetboot | Jet racing boat | 1220mm (48")
Sleek jet racing boat from the white water sceneOur River Race jet boat is a semi scale replica of the jet boats from the USA, which are equipped with 500 - 2500 hp for racing upstream. The model is characterized by its double tunnel system and can therefore be prototypically built with a jet drive.The advantages at a glance Excellent driving characteristics even in shallow water High maneuverability
Suitable for 40 and 50 internal and external rotor motors Suitable for combustion engines up to 32ccm Good to know Due to the high suction, the center of gravity is 40% seen from the transom Manufactured using the "wet in wet" sandwich process (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €319.00*
Waverider | Jetbike | 1180mm (46,5")
Let's get ready to rumble!The Waverider Jet Bike is just right for letting off steam on the water. Due to its compact size, this model can still be transported easily and still has an appealing size on the water.The advantages at a glance Perfect for those who like to rampage on the water Compact size for easy portability and inexpensive set-up That fits! Jet drives such as our Jet 48 and Jet 52 - we recommend using a reversing flap Suitable for 40 - 50 internal and external rotor electric motors Suitable for combustion engines up to 26ccm Good to know! The center of gravity is 35% seen from transom Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
€380.00*