Motor mount | Carbon | 50er Inrunner motors | Incl. ESC mount
€59.90*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
2413
Shipping weight/volume:
0.2 kg
Available stock:
15
Product information "Motor mount | Carbon | 50er Inrunner motors | Incl. ESC mount "
Boat building made easy
With this motor-ESC holder combo, your boat is set up quickly. No long searches, measuring, cutting. All parts fit perfectly.
The advantages at a glance
- Dual Motor Mount | The engine is optimally supported both at the rear and at the front
- Height and angle individually adjustable
- Integrated ESC bracket ensures short wiring, shorter cooling paths and protection against flow loss
- Smaller cut-outs on the rails ensure an optimal connection between boat and holder (We recommend using polymer glue)
- Required screws included to delivery as well
That's how it's done
- Degrease the motor mount (e.g. with brake cleaner) and glue it directly in the boat at the desired location
Technical datas
| Length: | 150mm (5,91") |
|---|---|
| Total width: | 78mm (3,07") |
| Inner diameter: | 56mm (2,20") |
| Material motor mount rings: | Aluminium 7075 | Anodized black |
| Max. cooling jacket length: | 80mm (3,15") |
| Material side parts: | 2mm (0,08") Carbon |
| ESC mount: | 2mm (0,08") Carbon 123,5 x 50mm |
| Included screws: | Screws 4 x M4x8 + 4 Washers | Screws 4 x M3 x 6 + Washers | Screws 4 x M3 x 8 |
Motor mount | Carbon | 50er Inrunner motors | Incl. ESC mount
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Collet clutch | 8 - 6,35mm (0,31" - 1/4") | Aluminium 7075
Top quality for the highest demandsOur collet coupling is made from aluminum 7075 and ensures a safe, precise and imbalance-free connection between the flex shaft and the motor.The advantages at a glancemade of aluminum 7075 absolutely centric and free of imbalance fine thread loss-free transmission of torque to the flex shaft easy assembly and disassembly That fits suitable for 6,35mm (1/4") flex shaft suitable for 8mm (0,31") motor shaft How it's donePart 1 of the coupling is pushed onto the motor shaft and secured using the two grub screws (optionally with Loctite). Then the union nut (part 2) is pushed onto the flexible shaft and connected to part 1.
€20.50*
Brushless motor | 56110-950KV | Inrunner motor
Good quality at a low priceThe advantages at a glance6 pole rotorDouble ball bearingGood torque | heat build-up ratioHigh balanced magnet armatureSmooth running even at high speedsDirection of rotation of the motor can be changed by changing the phasesThat fits Model boats from approx. 1,15m length 240 - 300A ESC8S | 2 blade propellers | Aluminum | slope 1.4 | Diameter 58-62mm 8S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 57-61mm 10S | 2 blade propellers | Aluminum | slope 1.4 | Diameter 60-64mm 10S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 59-63mm12S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 57-64mm12S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 56-63mmFor further questions please contact us
€190.00*