Rudder blade | Mystic 1140mm (44,88")| 2nd choice

Remain on trackWith our rudder linkage, direct and precise control of the rudder is no problem. The connection with the rudder is done by ball heads which can be easily connected to the steering device of your rudder.That's included2 x brass guide tube 2 x stainless steel cable with threaded bush 2 x ball heads 2 x linkage connection How is it done?You need a 3.2mm hole. The brass tube is inserted into this and sealed from the inside with polymer adhesive. We recommend to grease the flex shaft with flex shaft grease before mounting. Due to the fitting accuracy of brass tube and flexible shaft as well as the lubrication with flex shaft grease, the entry of water is reliably prevented. Additionally you may also use rubber seals.Good to knowFor a secure fit, we recommend attaching the brass guide tube to the side of the servo holder. For this purpose, polymer adhesive is suitable.

The original with the uniquely good driving characteristicsThere are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.The advantages at a glance Uniquely good driving characteristics for high speed and excellent cornering Only production worldwide according to the original data of the well-known Mystic C5000 by John CoskerThat fits Suitable for inner and outer rotor motors of the 30 and 40 series Suitable for assembly with our special scale drives | 1674-A Good to know The center of gravity for the setup is in the middle of the second stage as viewed from the stern Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

The original with the uniquely good driving characteristics as profi lineFor highest motor setup with double laminate and therefore even more strength.There are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.The advantages at a glanceDouble laminate for even more strengthUniquely good driving characteristics for high speed and excellent corneringOnly production worldwide according to the original data of the well-known Mystic C5000 by John CoskerThat fits Suitable for inner and outer rotor motors of the 30 and 40 series Suitable for assembly with our special scale drives | 1674-A Good to know The center of gravity for the setup is in the middle of the second stage as viewed from the stern Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 C-AFK + 1 layer 100 GRP + 1 layer 160 C-AFK + 1 layer 100 GRP)For further questions please contact us

The original with the uniquely good driving characteristics as profi lineFor highest motor setup with double laminate and therefore even more strength.There are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.The advantages at a glanceDouble laminate for even more strengthUniquely good driving characteristics for high speed and excellent corneringOnly production worldwide according to the original data of the well-known Mystic C5000 by John CoskerThat fits Suitable for inner and outer rotor motors of the 30 and 40 series Suitable for assembly with our special scale drives | 1674-A Good to know The center of gravity for the setup is in the middle of the second stage as viewed from the stern Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 CFK + 1 layer 100 GRP+ 1 layer 160 CFK + 1 layer 100 GRP) Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

The original with the uniquely good driving characteristicsThere are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.The advantages at a glance Uniquely good driving characteristics for high speed and excellent cornering Only production worldwide according to the original data of the well-known Mystic C5000 by John CoskerThat fits Suitable for inner and outer rotor motors of the 30 and 40 series Suitable for assembly with our special scale drives | 1674-A Good to know The center of gravity for the setup is in the middle of the second stage as viewed from the stern Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 C-AFK + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Rudder with double steering and many features Suitable for your Mystic 1140mm.The advantages at a glance: Two-sided rudder linkage device Black anodizing for added protection against corrosion The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.

The original with the uniquely good driving characteristicsThere are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.The advantages at a glance Uniquely good driving characteristics for high speed and excellent cornering Only production worldwide according to the original data of the well-known Mystic C5000 by John CoskerThat fits Suitable for inner and outer rotor motors of the 30 and 40 series Suitable for assembly with our special scale drives | 1674-A Good to know The center of gravity for the setup is in the middle of the second stage as viewed from the stern Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 CFK + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us