Taboo | 2080mm (82")
€950.00*
Content:
1 Piece
Available, delivery time: 1-5 labor days**
Product number:
1761
Shipping weight/volume:
41
kg
Available stock:
1
Product information "Taboo | 2080mm (82") "
Replica of the Fountain racing boat of the American Superboat and OSS racing class
The large and sleek Taboo has in contrast to the original Fountain no steps and therefore has an optimal handling in curves. Its beautiful driving image shows this monoboot both in smooth water and on the open sea and at speeds of up to 110km / h.
The advantages at a glance:
- Beautiful driving image
- Suitable for 50er in- and outrunner motors
- Suitable for gasoline engines with up to 50ccm
- Several setup option such as Z-drives, rudder strut sets, trimaxes.....
Good to know
- The center of gravity for construction is 35%
- Manufactured using the "wet in wet" sandwich process (1 layer 100 GFK + 1 layer 160 GFK+ 1 layer 100 GFK)
Videos
| Length: | 2080mm (82") |
|---|---|
| Width: | 465mm (18,3") |
| Height: | 370mm (14,6") |
| Weight: | Approx. 6450g (approx. 14,22lbs) |
| Material: | GFK/ FRP (Fibre glass reinforced plastic) |
| Color: | White |
| Center of gravity for assembly: | 35% from transom |
That fits
Strut + Outrigger | 6,35mm (1/4") | Long
Simple design that convincesThe advantages at a glance:
Adjustable inclineMade of high quality aluminum 7075Prop shaft made of V2A - therefore salt water resistant Brass tube can be glued directly into the strut That fits Hydroplane, outrigger, catamaran, monoboat from 110cm (43,3")Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. Place a piece of white paper on the oarstand and rub over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us
€49.00*
Sold out
Z-drive | S6 | 6,35mm (1/4")
Popular classic in new best formAs the successor to our sterndrive, we decided to design a new and improved version of the S6 sterndrive. The improvements at a glance:The body of the Z-drive is no longer made of cast aluminum, but of CNC-milled aluminum 7075The surface is compacted and additionally protected against corrosion and refined by anodizingClosed lubrication with low-viscosity gear grease. Smearing in the boat as in the predecessor is therefore a thing of the pastHelical gears are not pressed, but CNC milled, hardened, ground and therefore much more accurate and robustAll drive shafts are made of stainless steel (V2A). The upper shaft has two bearings, the lower shaft has three bearings and both are sealed by a SimmerringThe output speed is 1:1 Each drive is assembled by hand directly at and by us. A drilling template is also included in the scope of delivery and makes installation easier for you. Good to knowThe drive has a square mount for 6.35mm (1/4") flex shaft. The S6 drive can be used for both left and right rotation Suitable for boats from approx. 1200mm (with double drive 1400mm length) Suitable for 50 electric motors max. 32,000 rpm and 26-32cc power Suitable for use with semi-submerged propeller The peak of the torpedo should be for hulls with steps 2-4mm below keel line for hulls without steps 2-4mm above the keel line for assembly
Care instructionsThe drive must be commissioned in water only, as otherwise insufficient cooling can lead to damage to the shaft seal. The drive should be greased as required.For further questions please contact us
€329.00*
Rudder | Maxi | 193mm (7,6")
Length rudder blade:
155mm (6,10")
Rudder with boat sided steering for your boat from 150cm (59,1")The advantages at a glance: Two-sided rudder linkage device Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsGood to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
from €114.00*
Scorpion HK-7455-340KV - V2 | 24KW | Water cooled | Outrunner
New version of the special MHZ- Scorpion engines
The V2 version of the 7455 series comes now with new winding and a new type of integrated double helix water cooling. Because of it, the motor is even more efficient and durable.
The advantages at a glanceV2 version of outrunner motor with even higher efficiency (compared to inrunner motors with similar performance)New direct double helix water coolingBoth sided motor shaft for high stability and less vibration 20 Neodym magnet poles | 100% identic2 x 1,4 mm windingLarge ball bearings for high stability and long service life4 screws M5 included to delivery That fits Monoboat > 2m | 1 Motor | 2 Drives | Gear box | 12-14S | 2-3 Blade Propeller | Pitch 1.4 - 1,6 | Diameter 70-75mm Catamaran > 2m | 2 Motors | 12-14 S | 3-4 Blade Propeller | Pitch 1.4 - 1.6 | 75-80mm Surfboards or other water craftsSuitable ESC MGM 40063-3 or similairFor further questions please contact us
€999.00*
%
Scorpion HK-7455-340KV - V2 | Bundle Box | 24KW | Water cooled | Outrunner
New version of the special MHZ- Scorpion engines - as bundle box with motor mount
The V2 version of the 7455 series comes now with new winding and a new type of integrated double helix water cooling. Because of it, the motor is even more efficient and durable. The bundle box also includes the fitting motor mount.
Thats included1x Motor Scorpion 7455-340 water cooled | 2138-W1x Motor mount made of aluminium 7075 | 2137-MThe advantages at a glanceV2 version of outrunner motor with even higher efficiency (compared to inrunner motors with similar performance)New direct double helix water coolingBoth sided motor shaft for high stability and less vibration 20 Neodym magnet poles | 100% identic2 x 1,4 mm windingLarge ball bearings for high stability and long service life4 screws M5 included to delivery That fits Monoboat > 2m | 1 Motor | 2 Drives | Gear box | 12-14S | 2-3 Blade Propeller | Pitch 1.4 - 1,6 | Diameter 70-75mm Catamaran > 2m | 2 Motors | 12-14 S | 3-4 Blade Propeller | Pitch 1.4 - 1.6 | 75-80mm Surfboards or other water craftsSuitable ESC MGM 40063-3 or similairFor further questions please contact us
€1,030.00*
instead of
€1,075.00*
single purchase price (4.19% saved)
Scorpion HK-7455-330KV | 22,4KW | Water cooled | Outrunner
Exclusive special series of the popular Scorpion enginesThis series of water-cooled external rotor motors, manufactured exclusively for us, was developed in close cooperation with Scorpion Motors.The advantages at a glanceOutrunner motor with higher efficiency (compared to inrunner motors with similar performance)Efficient and direct water coolingBoth sided motor shaft for high stability and less vibration 20 Neodym magnet poles | 100% identic2 Turn delta windingLarge ball bearings for high stability and long service life4 screws M5 included to delivery That fits Monoboat > 2m | 1 Motor | 2 Drives | Gear box | 12-14S | 2-3 Blade Propeller | Pitch 1.4 - 1,6 | Diameter 70-75mm Catamaran > 2m | 2 Motors | 12-14 S | 3-4 Blade Propeller | Pitch 1.4 - 1.6 | 75-80mm Surfboards or other water craftsSuitable ESC MGM 40063-3 or similairFor further questions please contact us
€949.00*