Thrust washers | 4,75mm (3/16") | PEEK

Because sometimes things dont work out as plannedNo problem with our spare prop shaft  you are back at the water in a hurry or get your own drive system done. Good to knowSuitable for 3,2mm (0,13") flex shaft.

Because sometimes things dont work out as plannedNo problem with our spare prop shaft  you are back at the water in a hurry or get your own drive system done. Good to knowSuitable for 3,2mm (0,13") flex shaft.

Because sometimes things dont work out as plannedNo problem with our spare prop shaft for your Mystic 1140mm, you are back at the water in a hurry. Good to knowIn order to prevent the loss of your propeller and prop shaft, we recommend to use our flex safety with bearings which keeps the prop shaft inside of the hull just in case. 

Quick and easyThis set is perfect for quick and easy change of your Mystic 1140mm drive prop shafts. No more sanding, degreasing, gluing and hours of waiting. This shaft set is ready for usage so you are back on the water right away. Thats included:2 prop shafts with drive dog1 flex shaft 4,75mm (3/16") left - already glued to prop shaft1 flex shaft 4,75mm (3/16") right - already glued to prop shaftGood to knowThe flex shafts are much longer than needed on purpose. This way you are able to simply shorten them to required size and collect to your collet clutch directlyWe recommend a distance of 1,5mm between drive dog and drive body

Sophisticated solutions for highest demandsSuitable drives for your Mystic 1140mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds.  Details at a glance Made of highest quality aluminium 7075  Black anodizing for great looks and protection against corrosion Special hydrodynamic profile Stainless steel prop shaft  Salt water reistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials.  Good to knowThe drives do have an ajustable angle of +/-4° We recommend a distance of 1,5mm between drive dog and drive bodyTips for easy installation  A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now.  Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now.  For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us 

Sophisticated solutions for highest demandsSuitable drives for your Mystic 840mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds.   Details at a glance  Made of highest quality aluminium 7075   Black anodizing for great looks and protection against corrosion  Special hydrodynamic profile  Stainless steel prop shaft   Salt water reistance  Slight bearings ensure higher efficiency and low maintenance than ball bearings  Washers made of PEEK material for much longer service time than PTFE and other materials.   Good to knowThe drives do have an ajustable angle of +/-4° We recommend a distance of 1,5mm between drive dog and drive bodyTips for easy installation  A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now.  Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now.  For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us 

Rudder Strut Set for your boat between 70–100cm (27,6"–39,4")Perfect for your boat because of:Both-sided rudder sterring deviceMade from high quality aluminium 7075Drive shaft made of V2A (stainless steel) Suitable for usage in salt water as wellPlain bearings installed in the drives ensure high efficiency and low maintenance (compared to ball bearings)Thrust bearing washers are made of the highes quality PEEK material. This material is also resistant to most chemicalsThe rudder blade automatically folds upwards in the event of collision with flotsam. Damage to the hull caused by the rudder itself is thereby prevented.Thats included: Rudder - Strut system Adapter for Brass PTFE hose 7mm PEEK thrust bearing Good to knowWe recommend a distance of 1,5mm between drive dog and drive bodyFor assembly we recommend to use of 4 x M3 screws. A small trick helps to mark the holes at the transom. Place a white piece of paper on the rudder stand and strip several times with a pencil over it. By doing so, you "copy" the exact contours of the holder. Now simply cut the template, stick to the transom with adhesive tape and drill the required holes.For further questions please contact us