Drives | Kiton | CT-03 | 6,35mm (1/4") | 1 Pair
€250.00*
Content:
1 Pair
Available, delivery time: 1-5 labor days**
Product number:
1727-CT
Shipping weight/volume:
0.3
kg
Available stock:
1
Product information "Drives | Kiton | CT-03 | 6,35mm (1/4") | 1 Pair "
Sophisticated solutions for highest demands
Suitable drives for your Kiton as well as CT-03 and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds.
Suitable drives for your Kiton as well as CT-03 and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds.
Details at a glance
Made of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosionSpecial hydrodynamic profileStainless steel prop shaft Salt water reistanceSlight bearings ensure higher efficiency and low maintenance than ball bearingsWashers made of PEEK material for much longer service time than PTFE and other materials.
Good to know
The drives do have an ajustable angle of +/-4°
Tips for easy installation
A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now.
For fast and easy assembly (insulation) we recommend the usage of polymer glue.
| Total length: | 210mm (8,27") |
|---|---|
| Prop shaft: | 6,35mm (1/4") Flex shaft | 6,35mm (1/4") Drive Dog Propeller |
| Material: | Aluminium 7075, Stainless steel |
| Color: | Anodized black |
| Delivery: | 1 Pair |
| Weight: | 310g |
Drives | Kiton | CT-03 | 6,35mm (1/4") | 1 Pair
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Kiton | Monoboat | 1490mm (58,66") | Several versions
Material :
C-AFK
Hommage scale (1:10) of the legendary Italian offshore racing boat of the shipyard Meta MarineOur KITON unites, like no other monoboot, both elegance and excellent driving characteristics and is therefore suitable for both scalefans and racing professionals. In contrast to the original, we have only indicated the steps. In this way, our Kiton is easier to handle (especially in curves) and suitable for any water and speed.The advantages at a glancePerfect cobination of scale look and excellent drivingConstruction with rudder strut set or Trimax possibleSuitable for both 40 and 50 internal and external rotor motorsSuitable for gasoline engines with 26-30ccm Good to knowThe center of gravity for building is 26-30% The bracket (rear) has to be mounted by yourself - To do this, mark the area, degrease, sand and apply with epoxy resin or polymer glueManufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €430.00*
Kiton | Monoboat | 1490mm (58,66") | Several versions
Material :
GFK
Hommage scale (1:10) of the legendary Italian offshore racing boat of the shipyard Meta MarineOur KITON unites, like no other monoboot, both elegance and excellent driving characteristics and is therefore suitable for both scalefans and racing professionals. In contrast to the original, we have only indicated the steps. In this way, our Kiton is easier to handle (especially in curves) and suitable for any water and speed.The advantages at a glancePerfect cobination of scale look and excellent drivingConstruction with rudder strut set or Trimax possibleSuitable for both 40 and 50 internal and external rotor motorsSuitable for gasoline engines with 26-30ccm Good to knowThe center of gravity for building is 26-30% The bracket (rear) has to be mounted by yourself - To do this, mark the area, degrease, sand and apply with epoxy resin or polymer glueManufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €430.00*
MTI | CT-03 2.0 | Catamaran | 1704mm (66,9") | Several versions
Material :
GFK
Successor to the popular CT-03By popular demand, we've breathed new life into the CT-03. This is how the CT-03 presents the underwater hull and the excellent handling characteristics associated with it. The upper water ship is inspired by the MTI catamarans.
In the original, these 2x 8-10 cylinder engines with blower (roots compressor) are used. These are housed in the elevations on the side next to the cabin.The advantages at a glance Underwater hull of the CT-03 for optimal handling Surface ship in the design of the MTI With implied niches for exhaust and window framesThat fits Suitable for combustion engines from 26ccm (2x) and 2x RCMK 600 Twin Suitable for 50 internal and external rotor electric motors Construction as double drive Good to know The center of gravity for the body is 34-38% seen from the stern Laminated in the sandwich process, "wet in wet" (1 layer 100 GFK + 1 layer 160 GFK + optionally 1 layer C-AFK or CFK + 1 layer 100 GFK)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €699.00*
MTI | CT-03 2.0 | Catamaran | 1704mm (66,9") | Several versions
Material :
CFK
Successor to the popular CT-03By popular demand, we've breathed new life into the CT-03. This is how the CT-03 presents the underwater hull and the excellent handling characteristics associated with it. The upper water ship is inspired by the MTI catamarans.
In the original, these 2x 8-10 cylinder engines with blower (roots compressor) are used. These are housed in the elevations on the side next to the cabin.The advantages at a glance Underwater hull of the CT-03 for optimal handling Surface ship in the design of the MTI With implied niches for exhaust and window framesThat fits Suitable for combustion engines from 26ccm (2x) and 2x RCMK 600 Twin Suitable for 50 internal and external rotor electric motors Construction as double drive Good to know The center of gravity for the body is 34-38% seen from the stern Laminated in the sandwich process, "wet in wet" (1 layer 100 GFK + 1 layer 160 GFK + optionally 1 layer C-AFK or CFK + 1 layer 100 GFK)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €699.00*
MTI | CT-03 2.0 | Catamaran | 1704mm (66,9") | Several versions
Material :
C-AFK
Successor to the popular CT-03By popular demand, we've breathed new life into the CT-03. This is how the CT-03 presents the underwater hull and the excellent handling characteristics associated with it. The upper water ship is inspired by the MTI catamarans.
In the original, these 2x 8-10 cylinder engines with blower (roots compressor) are used. These are housed in the elevations on the side next to the cabin.The advantages at a glance Underwater hull of the CT-03 for optimal handling Surface ship in the design of the MTI With implied niches for exhaust and window framesThat fits Suitable for combustion engines from 26ccm (2x) and 2x RCMK 600 Twin Suitable for 50 internal and external rotor electric motors Construction as double drive Good to know The center of gravity for the body is 34-38% seen from the stern Laminated in the sandwich process, "wet in wet" (1 layer 100 GFK + 1 layer 160 GFK + optionally 1 layer C-AFK or CFK + 1 layer 100 GFK)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €699.00*
%
Bulgarian Cat | RC Catamaran | Bundle Box | 1460mm (57,48")
Material :
GFK
Bundle Box for fast and easy assembly - Thats included1x Bulgarian Cat | 16771x Flexshaft set | 1672-F2x Silicon hose| 15522x Clips | 15561x Rudder steering | 18331x Hydraulic dummie | 22062x Rubber cuffs | 16481x Drives | 1672-A1x Rudder | 10842x Water inlet | 17912x Water outlet | 17951x Servo mount | 1672-AS21x ESC mount | 1672-AS42x Steven pipe support | 10112x Flex shaft safety with ball bearing | 22562x Battery mount | 21271x Hatch security | 1802The record holderThe Bulgarian Cat has set over ten world speed records. Speeds of up to 257 km/h were measured. The underwater hull of the RC catamaran ensures optimal handling, even in curves, as well as rapid driving behavior.The advantages at a glance Catamaran for the strongest engine and high speed Suitable for 50 internal and external rotor electric motors.Good to know The center of gravity is between the first and second stage, depending on the weight of the motors and batteries. The heavier the weight, the further back the middle should beProduction in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)4Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €975.00*
instead of
€1,102.50*
single purchase price (11.56% saved)
Bulgarian Cat | RC Catamaran | 1460mm (57,48")
Material :
GFK
The record holderThe Bulgarian Cat has set over ten world speed records. Speeds of up to 257 km/h were measured. The underwater hull of the RC catamaran ensures optimal handling, even in curves, as well as rapid driving behavior.The advantages at a glance Catamaran for the strongest engine and high speed Suitable for 50 internal and external rotor electric motors Good to know The center of gravity is between the first and second stage, depending on the weight of the motors and batteries. The heavier the weight, the further back the middle should beProduction in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)4Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €470.00*
%
Bulgarian Cat | RC Catamaran | Bundle Box | 1460mm (57,48")
Material :
C-AFK
Bundle Box for fast and easy assembly - Thats included1x Bulgarian Cat | 1677-CAFK1x Flexshaft set | 1672-F2x Silicon hose| 15522x Clips | 15561x Rudder steering | 18331x Hydraulic dummie | 22062x Rubber cuffs | 16481x Drives | 1672-A1x Rudder | 10842x Water inlet | 17912x Water outlet | 17951x Servo mount | 1672-AS21x ESC mount | 1672-AS42x Steven pipe support | 10112x Flex shaft safety with ball bearing | 22562x Battery mount | 21271x Hatch security | 1802The record holderThe Bulgarian Cat has set over ten world speed records. Speeds of up to 257 km/h were measured. The underwater hull of the RC catamaran ensures optimal handling, even in curves, as well as rapid driving behavior.The advantages at a glance Catamaran for the strongest engine and high speed Suitable for 50 internal and external rotor electric motors.Good to know The center of gravity is between the first and second stage, depending on the weight of the motors and batteries. The heavier the weight, the further back the middle should beProduction in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)4Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €975.00*
instead of
€1,202.50*
single purchase price (10.6% saved)
Bulgarian Cat | RC Catamaran | 1460mm (57,48")
Material :
C-AFK
The record holderThe Bulgarian Cat has set over ten world speed records. Speeds of up to 257 km/h were measured. The underwater hull of the RC catamaran ensures optimal handling, even in curves, as well as rapid driving behavior.The advantages at a glance Catamaran for the strongest engine and high speed Suitable for 50 internal and external rotor electric motors Good to know The center of gravity is between the first and second stage, depending on the weight of the motors and batteries. The heavier the weight, the further back the middle should beProduction in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)4Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €470.00*
%
Bulgarian Cat | RC Catamaran | Bundle Box | 1460mm (57,48")
Material :
CFK
Bundle Box for fast and easy assembly - Thats included1x Bulgarian Cat | 1677-CFK1x Flexshaft set | 1672-F2x Silicon hose| 15522x Clips | 15561x Rudder steering | 18331x Hydraulic dummie | 22062x Rubber cuffs | 16481x Drives | 1672-A1x Rudder | 10842x Water inlet | 17912x Water outlet | 17951x Servo mount | 1672-AS21x ESC mount | 1672-AS42x Steven pipe support | 10112x Flex shaft safety with ball bearing | 22562x Battery mount | 21271x Hatch security | 1802The record holderThe Bulgarian Cat has set over ten world speed records. Speeds of up to 257 km/h were measured. The underwater hull of the RC catamaran ensures optimal handling, even in curves, as well as rapid driving behavior.The advantages at a glance Catamaran for the strongest engine and high speed Suitable for 50 internal and external rotor electric motors.Good to know The center of gravity is between the first and second stage, depending on the weight of the motors and batteries. The heavier the weight, the further back the middle should beProduction in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)4Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €975.00*
instead of
€1,232.50*
single purchase price (8.72% saved)
Bulgarian Cat | RC Catamaran | 1460mm (57,48")
Material :
CFK
The record holderThe Bulgarian Cat has set over ten world speed records. Speeds of up to 257 km/h were measured. The underwater hull of the RC catamaran ensures optimal handling, even in curves, as well as rapid driving behavior.The advantages at a glance Catamaran for the strongest engine and high speed Suitable for 50 internal and external rotor electric motors Good to know The center of gravity is between the first and second stage, depending on the weight of the motors and batteries. The heavier the weight, the further back the middle should beProduction in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)4Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €470.00*
Prop shaft | Mystic 1380mm | 6,35mm (1/4")
Because sometimes things dont work out as plannedNo problem with our spare prop shaft for your Mystic 1380mm, you are back at the water in a hurry. Good to knowIn order to prevent the loss of your propeller and prop shaft, we recommend to use our flex safety with bearings which keeps the prop shaft inside of the hull just in case.
€35.50*
Flex shaft set | Mystic 1380mm | Prop + Flex shaft | 6,35mm (1/4")
Quick and easyThis set is perfect for quick and easy change of your Mystic 1380mm drive prop shafts. No more sanding, degreasing, gluing and hours of waiting. This shaft set is ready for usage so you are back on the water right away. Thats included:2 prop shafts with drive dog1 flex shaft 6,35mm (1/4") left - already glued to prop shaft1 flex shaft 6,35mm (1/4") right - already glued to prop shaftGood to knowThe flex shafts are much longer than needed on purpose. This way you are able to simply shorten them to required size and collect to your collet clutch directly.
€98.00*