Flex shaft | Set | 4,75mm (3/16") | L+R
€26.90*
Content:
1 Set
In stock, delivery time: 1-5 labor days**
Product number:
1674-F
Shipping weight/volume:
0.2 kg
Available stock:
3
Product information "Flex shaft | Set | 4,75mm (3/16") | L+R"
Easy and fast solution
With our flex shaft set you get a suitable and uncomplicated solution for your boat with 4,75mm (3/16") twin drive.
With our flex shaft set you get a suitable and uncomplicated solution for your boat with 4,75mm (3/16") twin drive.
That's included:
- Flex shaft left 4,75mm (3/16")
- Flex shaft right 4,75mm (3/16")
- 2 x Brass PTFE tube 7mm (0,28")
How its done
For best grip, we recommend sanding the flex shaft before assembly, degreasing it and then gluing it into the prop shaft with Loctite.
Technical datas
| Length: |
ca. 190mm (7,48") |
|---|---|
| Diameter: | 4,75mm (3/16") |
| Rotation: | Left + Right |
| Material: | Steel, Brass, PTFE |
| Weight: | 32g |
Flex shaft | Set | 4,75mm (3/16") | L+R
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Drives | Mystic 1140mm | 4,75mm (3/16") | 1 Pair
Sophisticated solutions for highest demandsSuitable drives for your Mystic 1140mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds. Details at a glance Made of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosion Special hydrodynamic profile Stainless steel prop shaft Salt water reistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials. Good to knowThe drives do have an ajustable angle of +/-4° We recommend a distance of 1,5mm between drive dog and drive bodyTips for easy installation A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now.
For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us
€210.00*
Drives | Mystic 840mm | 4,75mm (3/16") | 1 Pair
Sophisticated solutions for highest demandsSuitable drives for your Mystic 840mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds. Details at a glance Made of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosion Special hydrodynamic profile Stainless steel prop shaft Salt water reistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials. Good to knowThe drives do have an ajustable angle of +/-4° We recommend a distance of 1,5mm between drive dog and drive bodyTips for easy installation A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now. For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us
€140.00*
Prop shaft | Mystic 1140mm | 4,75mm (3/16")
Because sometimes things dont work out as plannedNo problem with our spare prop shaft for your Mystic 1140mm, you are back at the water in a hurry. Good to knowIn order to prevent the loss of your propeller and prop shaft, we recommend to use our flex safety with bearings which keeps the prop shaft inside of the hull just in case.
€34.00*
Collet clutch | 5 - 4,75mm (0,19" - 3/16") | Aluminium 7075
Top quality for the highest demandsOur collet coupling is made from aluminum 7075 and ensures a safe, precise and imbalance-free connection between the flex shaft and the motor.The advantages at a glanceMade of aluminum 7075 Absolutely centric and free of imbalance Fine thread Loss-free transmission of torque to the flex shaft easy assembly and disassembly That fits Suitable for 4.75mm (3/16") flex shaft Suitable for 5mm (0,19") motor shaft How it's donePart 1 of the coupling is pushed onto the motor shaft and secured using the two grub screws (optionally with Loctite). Then the union nut (part 2) is pushed onto the flexible shaft and connected to part 1.
€19.00*
Collet clutch | 8 - 4,75mm (0,31" - 3/16") | Aluminium 7075
Top quality for the highest demandsOur collet coupling is made from aluminum 7075 and ensures a safe, precise and imbalance-free connection between the flex shaft and the motor.The advantages at a glancemade of aluminum 7075 absolutely centric and free of imbalance fine thread loss-free transmission of torque to the flex shaft easy assembly and disassembly That fits suitable for 4.75mm(3/16") flex shaft suitable for 8mm (0,31") motor shaft How it's donePart 1 of the coupling is pushed onto the motor shaft and secured using the two grub screws (optionally with Loctite). Then the union nut (part 2) is pushed onto the flexible shaft and connected to part 1.
€20.50*