Collet clutch | 8 - 4,75mm (0,31" - 3/16") | Aluminium 7075
€20.50*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
1022-8
Shipping weight/volume:
0.1 kg
Available stock:
49
Product information "Collet clutch | 8 - 4,75mm (0,31" - 3/16") | Aluminium 7075"
Top quality for the highest demands
Our collet coupling is made from aluminum 7075 and ensures a safe, precise and imbalance-free connection between the flex shaft and the motor.
The advantages at a glance
- made of aluminum 7075
- absolutely centric and free of imbalance
- fine thread
- loss-free transmission of torque to the flex shaft
- easy assembly and disassembly
That fits
- suitable for 4.75mm(3/16") flex shaft
- suitable for 8mm (0,31") motor shaft
How it's done
Part 1 of the coupling is pushed onto the motor shaft and secured using the two grub screws (optionally with Loctite). Then the union nut (part 2) is pushed onto the flexible shaft and connected to part 1.
| Length: | 42,5mm (1,67") |
|---|---|
| Diameter: | 22,5mm (0,89") |
| Motor shaft: | 8mm (0,31") |
| Flex shaft: | 4,75mm (3/16") |
| Material: | Aluminium 7075 |
| Material screw cap: | Extra hard brass |
| Secured with: | 2 set screws |
Collet clutch | 8 - 4,75mm (0,31" - 3/16") | Aluminium 7075
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Left
Highest quality for highest demandsWith our flex shaft your project will have no limitThe advantages at a glance:High quality for high power setups4,75mm (3/16") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.
€15.50*
Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Right
Highest quality for highest demandsWith our flex shaft your project will have no limitThe advantages at a glance:High quality for high power setups4,75mm (3/16") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.
€15.50*
Brass PTFE Hose | Steven pipe | 7mm (0,27") | 30cm (11,81") length
Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 4,75mm (3/16") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently.
€8.00*