Jet 58 | Steerable | Jet drive | Jet propulsion
€549.00*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
1723-58
Shipping weight/volume:
1.5 kg
Available stock:
8
Product information "Jet 58 | Steerable | Jet drive | Jet propulsion"
Jet drive
This jet drive is the perfect companion for your model boat with a vertical stern (90°) and a length of at least 1.30 m as well as your waveboard, hydrofoil, kitesurf or surfboard.
The Jet 58 supplies extrem high maneuverability.
The advantages of the Jet 58 at a glance:
- Nozzle, impeller, stator made of high-strength aluminum 7075
- All parts black anodized for extra protection against corrosion
- Flow optimized tunnel made of metal
- Steering Left | Right
- Triple bearing and shaft seal (Simmerring)
- Direct lubrication via grease nipple
- Salt water resistant
- Adjustable angle Left | right +/- 15° | Up | Down +/- 10°
That fits:
- Boats with a 90° stern and at least 1.30m in length
- Waveboard, Hydrofoil, Kitesurf or Surfboard
- Internal and external rotor motors 50 series
- Gas engines with 26-40ccm
Good to know:
- The jet must be greased before usage
- Flush wih fresh water after usage in salt water
- For further questions please contact us
| Length: | 218mm (8,58") |
|---|---|
| Height: | 89mm (3,5") |
| Width: | 88mm (3,46") |
| Weight: | 760g |
| Shaft: | 9mm (0,35") |
| Impeller: | 58mm | Aluminium 7075 (2,28") |
| Static thrust: | 120 - 330N (12-24,47Kg) |
| Rpm: | 20.500 - 23.500 |
| Min. required power: | 4.5 - 6 KW Current |
| Material: | Aluminium 7075 | Tunnel Metal |
Jet 58 | Steerable | Jet drive
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Motor mount | Carbon | Scorpion 5035
Motor assembly made easyFor quick and easy assembly of your MHZ Scorpion engine 5035.The advantages at a glanceCustom-fit motor mount made of 2mm carbonAngle | Inclination individually adjustableMotor cables can be routed through the recess on the sideThat fitsWe recommend fixing the motor mount in the fuselage with polymer glue. This ensures maximum strength and yet is highly elastic. This dampens shocks and noise.
€26.90*
Scorpion HK-5035-760KV | 7,4KW | Water cooled | Outrunner
Exclusive special series of the popular Scorpion enginesThis series of water-cooled external rotor motors, manufactured exclusively for us, was developed in close cooperation with Scorpion Motors.The advantages at a glanceOutrunner motor with high efficiencyDirect water cooling inside motor - cooling water nipples are connected to motor directly through the opposite millings for water nipplesThe third milling has to be closed with a set screwLarge ball bearings for high stability and long service life4 screws M4, 3 x cooling nipple M4 included to deliveryRotation of motor can be changed by exchange of phases or usage of suitable ESC That fits 300A regulators and 6-10S Propeller at 6S | 55-57mm | pitch 1.4 | 2 blade Propeller at 6S | 54-56mm | pitch 1.4 | 3 blade Propeller at 8S | 54-63mm | pith 1.4 | 2 blade Propeller at 8S | 53-62mm | pith 1.4 | 3 blade Propeller at 10S | 54-65mm | pitch 1.4 | 2 bladePropeller at 10S | 53-64mm | pitch 1.4 | 3 bladeFor further questions please contact us
€359.00*
Brushless motor | 56110-950KV | Inrunner motor
Good quality at a low priceThe advantages at a glance6 pole rotorDouble ball bearingGood torque | heat build-up ratioHigh balanced magnet armatureSmooth running even at high speedsDirection of rotation of the motor can be changed by changing the phasesThat fits Model boats from approx. 1,15m length 240 - 300A ESC8S | 2 blade propellers | Aluminum | slope 1.4 | Diameter 58-62mm 8S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 57-61mm 10S | 2 blade propellers | Aluminum | slope 1.4 | Diameter 60-64mm 10S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 59-63mm12S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 57-64mm12S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 56-63mmFor further questions please contact us
€190.00*
Motor mount | Carbon | 50er Inrunner motors | Incl. ESC mount
Boat building made easyWith this motor-ESC holder combo, your boat is set up quickly. No long searches, measuring, cutting. All parts fit perfectly. The advantages at a glance Dual Motor Mount | The engine is optimally supported both at the rear and at the front Height and angle individually adjustable Integrated ESC bracket ensures short wiring, shorter cooling paths and protection against flow loss Smaller cut-outs on the rails ensure an optimal connection between boat and holder
(We recommend using polymer glue) Required screws included to delivery as wellThat's how it's done Degrease the motor mount (e.g. with brake cleaner) and glue it directly in the boat at the desired location
€59.90*