Thrust washers | 6,35mm (1/4") | PEEK

Outer diameter:	13mm (0,5")
Inner diameter:	8mm (0,31")
Thickness:	1,7mm (0,07")
Material:	PEEK - Black
Weight:	1g
Delivery contains:	1 pcs.

Prop shaft | 6,35mm | Strut shaft

Spare part by handSpare prop shaft 6,35mm (1/4") made of stainless steel. That fitsStrut 1071Strut with outrigger short 1075-KStrut with outrigger long 1075-LGood to knowTo avoid lost of your prop shaft and propeller, we suggest to use our flex safety with ball bearing.

€20.00*

Prop shaft + Flex shaft | 6,35mm

Rotation flex shaft : Right (Counter clock | #1005-R)

Spare part by handSpare prop shaft 6,35mm (1/4") made of stainless steel ready for usage with already glued in flex shaft (rotation according to your order)That fitsStrut 1071Strut with outrigger short 1075-KStrut with outrigger long 1075-LGood to knowTo avoid lost of your prop shaft and propeller, we suggest to use our flex safety with ball bearing.

from €27.00*

Prop shaft + Flex shaft | 6,35mm

Rotation flex shaft : Left (Normal | #1005)

Spare part by handSpare prop shaft 6,35mm (1/4") made of stainless steel ready for usage with already glued in flex shaft (rotation according to your order)That fitsStrut 1071Strut with outrigger short 1075-KStrut with outrigger long 1075-LGood to knowTo avoid lost of your prop shaft and propeller, we suggest to use our flex safety with ball bearing.

from €27.00*

Prop shaft | Mystic 1380mm | 6,35mm (1/4")

Because sometimes things dont work out as plannedNo problem with our spare prop shaft for your Mystic 1380mm, you are back at the water in a hurry. Good to knowIn order to prevent the loss of your propeller and prop shaft, we recommend to use our flex safety with bearings which keeps the prop shaft inside of the hull just in case.

€35.50*

Flex shaft set | Mystic 1380mm | Prop + Flex shaft | 6,35mm (1/4")

Quick and easyThis set is perfect for quick and easy change of your Mystic 1380mm drive prop shafts. No more sanding, degreasing, gluing and hours of waiting. This shaft set is ready for usage so you are back on the water right away. Thats included:2 prop shafts with drive dog1 flex shaft 6,35mm (1/4") left - already glued to prop shaft1 flex shaft 6,35mm (1/4") right - already glued to prop shaftGood to knowThe flex shafts are much longer than needed on purpose. This way you are able to simply shorten them to required size and collect to your collet clutch directly.

€98.00*

Prop shaft | Mystic 1850 1890mm | 6,35mm (1/4")

Because sometimes things dont work out as plannedNo problem with our spare prop shaft for your Mystic 1850 - 1890mm, you are back at the water in a hurry. Good to knowIn order to prevent the loss of your propeller and prop shaft, we recommend to use our flex safety with bearings which keeps the prop shaft inside of the hull just in case.

€35.50*

Flex shaft set | Mystic 1850 - 1890mm | Prop + Flex shaft | 6,35mm (1/4")

Quick and easyThis set is perfect for quick and easy change of your Mystic 1850 - 1890mm drive prop shafts. No more sanding, degreasing, gluing and hours of waiting. This shaft set is ready for usage so you are back on the water right away. Thats included:2 prop shafts with drive dog1 flex shaft 6,35mm (1/4") left - already glued to prop shaft1 flex shaft 6,35mm (1/4") right - already glued to prop shaftGood to knowThe flex shafts are much longer than needed on purpose. This way you are able to simply shorten them to required size and collect to your collet clutch directly.

€98.00*

Rudder Strut Set | Midi | 6,35mm (1/4")

Length rudder blade: 155mm (6,10")

Universal complete system for your boat from 120cm (47,24")The advantages at a glance: Two-sided rudder linkage device Height adjustable strut Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsThats included: Rudder - strut system with linkage levers on both sides Thrust washer made of PEEK material Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us

from €135.00*

Rudder Strut Set | Maxi | 6,35mm (1/4")

Length rudder blade: 135mm (5,31")

Universal complete system for your boat from 150cm (59,1")The advantages at a glance: Two-sided rudder linkage device Height adjustable strut Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsThats included: Rudder - strut system with linkage levers on both sides Thrust washer made of PEEK material Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us

from €150.00*

Drives | Kiton | CT-03 | 6,35mm (1/4") | 1 Pair

Sophisticated solutions for highest demands Suitable drives for your Kiton as well as CT-03 and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds. Details at a glanceMade of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosionSpecial hydrodynamic profileStainless steel prop shaft Salt water reistanceSlight bearings ensure higher efficiency and low maintenance than ball bearingsWashers made of PEEK material for much longer service time than PTFE and other materials. Good to knowThe drives do have an ajustable angle of +/-4°Tips for easy installation A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now. For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us

€250.00*